Common Causes of Low Water Pressure in Your Home
Issues related to water pressure at home may vary. Regardless of how the issues present themselves, it’s quite frustrating to deal with reduced water pressure.
For instance, faucets may be taking extremely long to fill the bathtub or sink, or the showerhead might not be giving you a strong spray. Also, your washing machine or dishwasher may be taking too long to run than it normally does.

If the water pressure is low from only one plumbing fixture, then you can remedy the problem by focusing on the pipe serving it.
However, if the issue is affecting your entire home, then you might be dealing with one among several problems. If the water pressure in your home seems low, try to assess the origin of the problem by narrowing down all the possible causes.
Here’s how to figure out why your home water pressure may be low:
Is the main valve at your water meter fully open?
Most homes have two main water shutoff valves for controlling the water flow, along with safety valves for added protection. The first valve is typically located adjacent to the main water meter, along the pipe that serves your home from the main water supply.
In most cases, you may not use the valve as it’s typically owned by your water company. Thus, it’s only used by their personnel. However, if your home water pressure appears to be low after some plumbing work, it’s likely that the main valve isn’t fully open.
In case you’ve recently had some repairs done, and all of a sudden, the pressure of water throughout your home is lower than normal, check your water meter valve. The valve might be located along the pipe leading to your home or in a buried box between your home and the adjacent street.
It can also be within your home in the garage or basement. The valve should be fully open if the handle is parallel to the supply pipe. If not, then it’s not completely open. Just turn it to open it fully.
Is your home’s main shutoff valve fully open?
You’ll need to locate the second shutoff valve. It should be somewhere within your home or near the main water supply pipe entering your home. In warm areas, this valve might be outdoors. Once you locate it, make sure it’s fully open.
In case it’s a gate type of valve, with a handle resembling a wheel, try to check whether it’s fully turned counterclockwise. In case it’s a ball-type valve with a lever-like handle, ensure it’s in a parallel direction to the supply pipe.
Just like with the main valve at your water meter, the main valve might have been left partially open after some plumbing repairs.
Thus, if you’ve recently had some plumbing repairs and you notice a decrease in the water pressure, then it’s likely that a valve was left partially open.
However, not every pressure issue originates solely from household plumbing. For instance, in homes using well water, problems with the pump can affect overall pressure and flow. In such instances, searching online for “well pump repair near me” can help you find reliable professionals who specialize in diagnosing and fixing these issues.
Is the water pressure regulator faulty?
The problem of low water pressure can also result from a faulty water pressure regulator. The pressure regulator controls the pressure of the water going into your home to keep it at a safe pressure level for your plumbing system.
However, some homes don’t have one. In case your home has one and it’s failing, then it’ll lead to either high or low water pressure. In case the regulator is faulty, you’ll notice a sudden increase or reduction in water pressure at all fixtures.
Although you may replace it with a similar regulator in terms of size and brand, in most instances, leave such work to a professional plumber. Replacing the regulator will require shutting off your water supply at the main shutoff valve.
You can easily test your water supply pressure using a pressure gauge. Attach the gauge onto the hose spigot nearest the pressure regulator or main water meter.
The recommended pressure ranges from 52-75 pounds for every square inch. In case the pressure is lower, then you may be dealing with a faulty pressure regulator.
Does your home have old galvanized iron/steel pipes?
One of the worst causes of low pressure in your home’s water supply is corroded galvanized iron/steel pipes. The pipes may corrode to the extent of restricting water flow.
These pipes may corrode from the inside such that you won’t see the problem. The corrosion may buildup over time and close off the supply pipe.
Problems related to corrosion develop over decades. Thus, the reduced water pressure is extremely gradual such that you can’t notice it all of a sudden.
However, if you’ve just moved into an older home that has steel supply pipes, they may be significantly corroded. The problem might worsen quickly once you start using the pipes.
Unfortunately, it’s often expensive to fix this problem as the best solution is re-piping the entire steel pipe network with new plastic or copper supply pipes.
There’s actually no other way to fix this problem. Today, the best replacement pipes with respect to ease of re-piping and cost are PEX tubing.
This is a collaborative post






















