Top 7 Condensing Boiler Flue Problems & How To Avoid Them

boiler
This is a collaborative post

Is your condensing boiler playing up, or has your old boiler given up the ghost? Maybe you are in the planning stages for your new home or just looking for ways to improve your home? 
For all these reasons and more, you’re just right to be gathering information on condensing boiler flue problems. 

Better the devil you know… so let’s get acquainted with its 7 common problem areas.

7 common flue problems

#1 Plumes fest

Whether it’s an oil or gas boiler, a condensing boiler will emit a much larger volume of water vapour than a conventional boiler. This means more discharge through the flue – that duct used to dispose of combustion fumes. 

What’s the problem with that, you may ask? 

The answer is, vitiation. In other words, it’s the accumulation of gases right at the flue terminal, which can potentially be directed back into the boiler’s air supply rather than out of it. It’s easy to see how this would be causing the boiler problems. Translate this into occasional breakdowns at best or a full-on breakdown at worst.

The science behind this is that a condensing boiler emits plumes of a much cooler temperature (around 55 degrees Celsius) than a conventional boiler (200 degrees Celsius). As heat rises, a conventional boiler easily disperses plumes high into the air, whereas this is typically something condensing boilers have an issue dealing with.

To avoid this, you need to ensure flue gases are quickly drawn outwards via a top-notch installation. This entails looking at several points, per below.

#2 Condensate disaster, part 1

Condensing boilers are used for energy efficiency because they are able to generate more heat using a condensing system. 

This is how it works: the water heated by gas or oil supplies your radiators. The heat generated inside the boiler then meets the cold water coming back from your previously dormant radiators. 

Coinciding hot water (around 200 degrees Celsius) and cold water (below the 55 degree Celsius mark, or point of dewing) in your boiler, you get a mixture of water vapour and flue gases that need to be expelled in a suitable way.

The reason being that these exhaust fumes are acidic and present a trip hazard if allowed to freeze. Let’s say this condensate ended up on a public road or pathway in icy conditions, this could harm you or others around you, hence the need to install a drainpipe to secure the area around your boiler flue.

#3 Condensate disaster, part 2

Just as condensate plumes may cause problems outside if not collected properly, they can also ruin your pipework if not drained separately. Condensate discharge drain pipes should therefore be fitted.

Override this step and the acidic build-up in your boiler will drastically reduce its efficiency and inflate your energy bill.

#4 Flue maze, shmaze

The longer the pipework, the more room for error. If the structure of your home and the location of your condensing boiler requires extensive piping, you want to make sure it is a state-of-the-art engineering job. 

Condensate discharge piping will have to be at a slight angle to allow the fluid to flow back down securely to the boiler and its drainpipe.

To be on the safe side, it is recommended to keep bends to a minimum and lay down no more than 3 metres of piping.

#5: Screws you lose

Since 2005, all new boilers have to be condensing boilers by law. Make sure you enlist the help of a gas-safe engineer to adhere to regulations and ensure proper fitting. 

This includes providing two screws per joint, as one-screw jobs have demonstrated their inadequacy by consistently turning up loose. 

It’s amazing how one more screw can make a difference!

#6: Top Gear

Condensing boiler flue problems can also simply be down to unsuitable material. Allow flue gases to pass through a copper or steel pipe of the non-stainless type and you will end up with damaged pipes, cracks and leaks.

Having the right gear in place also includes an inspection hatch which makes it possible for your local gas-safe engineer to check your flue for faults or deterioration when servicing is due each year.

#7: Seal it like you mean it

Your boiler flue will likely pass through a wall and requires proper sealing to remain risk-free. By that, we mean an adequate material for sealing as well as sealing both entry and exit points of the flue.

As you will have gathered, half-measures won’t get you far when it comes to getting your condensing boiler mounted. Putting in some tender loving care from the start helps keep your boiler compliant and safe in the long run.

What comes out of a condensing boiler flue?

Boiler flues are generally treated like the boiler’s chimney. Rather than emitting smoke, the main waste products are carbon dioxide and water vapour. 

What causes boiler flue blockages?

Most boiler flues are fixed outside the home, which makes them exposed to the outside world a lot more. Unfortunately, this will attract a lot of debris which may be in the air, resulting in a clogged flue. This may be leaves, insects, dead birds or their nests. Properties closer to rural areas are surrounded by more trees, which generally carries more risks.

How do I know if my boiler flue is clogged?

Early blockages may be difficult to notice, but any white stains around the connection of the flue could be a tell-tale sign and indicate a blockage.

Other blockages can be spotted from the outside, particularly if it’s blocked by garden debris. It can also be easily noticed if a black substance is on the outside of the flue.

The most obvious one would be to install a Carbon Monoxide alarm into the home, detecting any Carbon Monoxide emissions. The alarms can be purchased from a DIY store, but remember it must be approved with the latest British Standards Kitemark.