Daily Archives:

10th June 2019

High Heel Greeting Card By Dreaming Tree – Cricut Tutorial

I love this little high heel greeting card from Dreaming Tree. I have lots of girly friends and family members who would love to receive one of these cards for their birthday. A great bonus is that the SVG files to make this card are totally free from Dreaming Tree ๐Ÿ™‚

High Heel Greeting Card

If you prefer video tutorials to written tutorials, you can find the Dreaming Tree tutorial video here.

Before I begin the tutorial, I just need to let you know that in the first image below, it shows a white piece of cardstock. When it came to using the white card, I decided I needed a stronger colour and changed to a dark purple cardstock. I’d already cut some files before I decided on the change so I couldn’t retake the photo!

For this tutorial, you will need:

  • Cardstock in  a design of your choice for the shoe – I used glitter cardstock
  • Co-ordinating cardstock for the shoe embellishments – I used adhesive foil
  • Cardstock for the flower embellishments, the card insert and the envelope embellishment
  • Card/paper of your choice for the envelope
  • Glue
  • Cutting machine – I used a Cricut Maker
  • Cricut cutting mats – I used a green and a blue mat
High heel greeting card supplies

To see how I got to the cutting stage for this tutorial, check my previous tutorial –ย How To Download, Unzip & Upload SVG Files

1 – After you’ve clicked Make It in Design Space, you’ll be taken to the Prepare screen.

Click Continue

cut high heel shoe

Choose your material by clicking on All Materials.

high heel greeting card - choose material

I’m using Glitter cardstock.

high heel greeting card -choose material

When you’ve set your material, you will be taken to the following screen and on the Cricut machine, the Load button will be flashing.

high heel greeting card - cut high heel shoe

Load your card onto a mat – I used the green mat because it holds the glitter cardstock well – then place the mat under the guides on the machine and while holding the mat in place, press the load button.

Press the Cricut Go button when it flashes.

When your first piece has finished cutting, carefully remove it from the board and set it aside.

Load the next piece of card onto the mat. I used Adhesive foil and the blue mat. Remember to change your material settings.

high heel greeting card - cut 2 - embellishments

Load the mat into the machine and press the Cricut Go button when it flashes

adhesive foil embellishments

Unload the mat and remove the embellishments carefully, from the board.

embellishments cut

Load your envelope card/paper onto the mat and then load into the machine. Press the Cricut Go button when it flashes.


Unload the mat and carefully remove the envelope and excess card/paper from the board.

envelope cut

Load the mat with the card for the next piece then load the mat into the machine and press the Cricut Go button when it flashes.

main card

Load the mat for the final time and load into the machine.

second set of embellishments

Remove the card from the mat and fold along the score line.

main card cut

Glue the high heel piece to the card ensuring it all lines up along the edge then glue the embellishment piece onto the shoe piece.

attach high heel shoe and embellishment

Using a piece of dowel or similar, shape the flower embellishment petals by holding the flower and dowel together then pulling the flower down between your finger and the dowel while slightly bending the card as you pull it.

Glue the flowers to the card.

add flower embellishments

Stick the flower middles onto the flowers.

add middle of flowers embellishments

At the bottom of the heel, you’ll see two tiny cuts. These are there to help you with placing the heel piece in the right place.

cut marks show where embellishment is to be placed

Glue the heel piece into place.

attach bottom of heel

There are also tiny cut marks to show you where the sole needs to be placed.

cut marks to show where sole is to be placed

It should look like this:

attach purple sole

Add gem embellishments.

add gem embellishments

Fold all the score lines on the envelope piece then apply glue to the inside envelope flap.

high heel greeting card - fold envelope on score lines then put glue on inside flap

Glue the envelope flap piece into place.

high heel greeting card - stick purple flap to envelope

And that’s your card and envelope complete ๐Ÿ™‚

high heel greeting card - completed card and envelope

How To Download, Unzip & Upload SVG Files – A Tutorial

After receiving my shiny new Cricut Maker a few of months ago, it’s fair to say I’m now a little bit addicted to paper crafting!
One of my favourite sites to download SVG files from is Dreaming Tree. I stumbled across them while Googling for free SVG files.
I’m now a member of the Dreaming Tree Facebook group and I love looking through all the results. Each person puts their own creative style into the projects so no matter how many ‘exquisite eggs’ or ‘darling dress’ cards are shared, they’re all different and provide me with lots of inspiration for my own projects.

Design Space

SVG files are used by Design Space, which is the online design software for Cricut. You upload the files to Design Space and it then sends instructions to the machine, telling it what you want it to do.

Dreaming Tree has many videos on their site to help you learn. If you prefer videos to written tutorials, the videos that show you how to unzip and upload the Dreaming Tree SVG files can be found here.

Video Tutorials

I don’t much care for video tutorials personally, especially on my phone. I find myself having to rewind the video often as I get behind and miss bits. It’s harder to rewind on my phone because of the smaller screen and my chunky fingers!
With a written tutorial, I don’t need to do anything except scroll to the next instruction when I’m ready ๐Ÿ™‚

Dreaming Tree Tutorial – How to download, unzip and upload files to Design Space

With this in mind, and knowing I’m not the only one who prefers written instructions, I’m going to show you today how I download an SVG file from Dreaming Tree, how to unzip it when you have it on your Windows machine and how to upload it to Design Space.

I created an account at Dreaming Tree because I plan to be a long term customer! The following tutorial assumes you’ve created an account and are logged in.

We’ll be using the High Heel greeting card file. This is a free download.

Click the following link to be taken to the download page – High Heel Greeting Card
Add the file to your shopping cart.

Dreaming Tree high heel card download

Click on your shopping cart and click Checkout

Dreaming Tree high heel card checkout

Click Place Order

Dreaming Tree high heel card place order

You will receive an email confirming your purchase and there will be a link in it which will take you to the download. Alternatively, go to your account and click on Downloads

Dreaming Tree high heel card download

Find the file and click the blue button to download it.

download file

I created a new folder in my Documents folder and called it Dreaming Tree. When you’ve picked your folder, click Save

choose location to download file

Open the folder that contains your file and right click on the zip file. On the dropdown menu, click Extract All

extract zip file

A window will pop up telling you which folder the files will be extracted to. On my laptop, it always chooses the folder I’m already in so I never change the file destination.

select folder to extract files

You will now have the extracted folder and the empty zipped folder.

extracted folder

Right click on the zip folder and click on Delete

delete empty zip folder

You will now have the folder containing your svg files. Click on it to open it.

extracted folder

Inside this folder, you have another folder titled SVG. Click this folder to open it.

svg folder and jpg files

Inside the SVG folder, you’ll see two more folders and the SVG files. You need to upload all the SVG files to Design Space, including the SVG files in the envelope folder.
For the purpose of today’s tutorial, I won’t be using the extra files. The Extras folder contains a solid scorelines file and a Caption file. I’ll cover these in a later tutorial.

svg files

Open Design Space and click New Project

design space new project

You will now have a blank canvas. Click Upload

design space canvas

Click Upload Image

design space upload file

Click Browse

design space choose file location

Browse to the folder that contains your SVG files and click elements_peapod.svg

choose svg file

When it opens in Design Space, click Save

design space save file

Your new file will now show on your Recently Uploaded Images.

dreaming tree choose file

Repeat the process until you have all 4 SVG files uploaded into Design Space.
Don’t forget, like I did when making this tutorial, to go back and upload the envelope file in the same way! You should have 5 files, not 4 as in the screenshot.

uploaded svg

Click on each of the five(!) files and click Insert Images

You will now have the files on the canvas of Design Space. Down the side, you can see the layer palette.

design space canvas files inserted

You now need to look at each layer in turn and see if any of them need attaching. The attach button is kind of like a paperclip; it clips 2 layers together so when you move them, they stay together and remain in the right place. If you didn’t attach the layers, the machine would put both layers on separate mats or on the same mat but not in the correct place.

The elements_peapod, elements_salmon and panel_black_pattern are single layers and don’t have any parts that need attaching. When you click on these layers, the actions at the bottom, including Attach won’t be available.

The main_white has a separate cut layer. This cut layer is in place of a solid scoring layer. This means that those who don’t have a scoring wheel or scoring tool will have tiny little cuts in a straight line in the place where the card needs to be folded.
If you click on main_white and look at the bottom of the layer palette, you’ll see that Attach is now available to click.
Click Attach

design space layers

The Attached layer will now move to the top.

You need to do the same with the envelope layer because it has a layer that needs attaching so the score lines are in the right place.

You can now click the save button and save your project. It will then be available in your projects every time you want to make a new card.
Just click save and give your project a name.

Click Make It

design space attach

You will now be taken to the Prepare Mats screen.

design space make it

That’s it for this tutorial. If you’d like to carry on and see the cutting and assembling process click for Part 2 

Verified by MonsterInsights